Saturday, July 25, 2020

1890 Census--Not Everything was Destroyed

The 1890 U.S. Census: Not Everything Was Destroyed

Beginning U.S. genealogists soon learn that the 1890 census records were destroyed in a fire in the basement of the Commerce Building on January 10, 1921. I wrote about this recently in What Really Happened to the 1890 U.S. Census? at https://bit.ly/32PUQyz.

Photo of the 1890 U.S. census taken after the fire.

Many people who would like to see these records just shrug their shoulders and move on.

A short search on the World Wide Web, however, soon reveals that not all of the records were destroyed.

In fact, the morning after the fire, Census Director Sam Rogers reported the extensive damage to the 1890 schedules, estimating that only 25 percent of the records were destroyed, with 50 percent of the remainder damaged by water, smoke, and fire.

Salvage of the water-soaked and charred documents might be possible, reported the bureau, but saving even a small part would take a month, and it would take two to three years to copy and save all the records damaged in the fire. The preliminary assessment of Census Bureau Clerk T. J. Fitzgerald was far more sobering. Fitzgerald told reporters that the priceless 1890 records were “certain to be absolutely ruined. There is no method of restoring the legibility of a water-soaked volume.”

Note: The statement “There is no method of restoring the legibility of a water-soaked volume” was undoubtedly true in 1921. However, had the fire occurred years later, many of the volumes could have been saved. Today, water-soaked documents can be freeze dried, removing the water without creating additional damage to the pages. Unfortunately, such technology was not available in 1921.

Speculation and rumors about the cause of the blaze varied widely. Many suspected that a carelessly discarded cigarette or a lighted match was the cause. Employees were questioned about their smoking habits. Others believed the fire started among shavings in the carpenter shop or resulted from spontaneous combustion. At least one woman from Ohio felt certain the fire was part of a conspiracy to defraud her family of their rightful estate by destroying every vestige of evidence proving heirship! However, the true cause of the fire was never proven.

At the end of January, 1921, the records damaged in the fire were moved for temporary storage. Over the next few months, rumors spread that salvage attempts would not be made and that Census Director Sam Rogers had recommended that Congress authorize destruction of the 1890 census. Prominent historians, attorneys, and genealogical organizations wrote in protest to Secretary of Commerce Herbert Hoover, the Librarian of Congress, and other government officials. The National Genealogical Society and the Daughters of the American Revolution formally petitioned Hoover and Congress, and the editor of the NGS Quarterly warned that a nationwide movement would begin among state societies and the press if Congress seriously considered destruction. The National Archives quickly denied that the records would be destroyed.

By May of 1921, the records were still piled in a large warehouse without proper storage. The records were quickly deteriorating as summer heat approached in the non-air conditioned warehouse. Census Director William Steuart ordered that the damaged records be transferred back to the census building, to be bound where possible, but at least put in some order for reference.

The water-soaked records remained at the census building for nearly eleven years, apparently not well cared for. In December 1932, in accordance with federal records procedures at the time, the Chief Clerk of the Bureau of Census sent the Librarian of Congress a list of papers no longer necessary for current business and scheduled for destruction. He asked the Librarian to report back to him any documents that should be retained for their historical interest. Item 22 on the list for Bureau of the Census read “Schedules, Population . . . 1890, Original.”

The Librarian identified no records as permanent; the list was sent forward, and Congress authorized destruction of the remaining 1890 census records on February 21, 1933. Despite assurance by census officials in 1921 that the damaged records would not be destroyed, government bureaucrats did exactly that in the 1930s. Even worse, damaged and undamaged pages alike were destroyed. The entire process was not well publicized, with only minor notes buried inside governmental reports. The date of the actual destruction of the 1890 census records was never recorded although it probably was in 1935.

It seems sad that Washington bureaucrats quietly destroyed these valuable records without public review and scrutiny.

However, the story does not end there. The bureaucrats overlooked some records!

In 1953, National Archives found an additional set of 1890 census record fragments. These sets of extant fragments are from Alabama, Georgia, Illinois, Minnesota, New Jersey, New York, North Carolina, Ohio, South Dakota, Texas, and the District of Columbia. These surviving fragments were preserved and microfilmed. They are still available today, despite the “common knowledge” that the 1890 U.S. Census was destroyed in a fire.

Before you disregard this census, you should always verify that the schedules you seek did not survive. If you are looking for ancestors in 1890 in Alabama, Georgia, Illinois, Minnesota, New Jersey, New York, North Carolina, Ohio, South Dakota, Texas, or the District of Columbia, you might have a pleasant surprise. Be aware that the surviving records are only a tiny fraction of the total records, even for those states. Nonetheless, you won’t know until you check.

You can view National Archives Microfilm Publication M407 (3 rolls) and a corresponding index, National Archives Microfilm Publication M496 (2 rolls). Ancestry.com has obtained copies of these microfilms and digitized all the records listed there. Quoting the Ancestry.com web site at https://www.ancestry.com/search/collections/5445/:

These records have been extracted from the remaining population schedules for the 1890 Federal Census, which was destroyed by a fire at the Commerce Department in Washington, DC on 10 January 1921. The surviving fragments consists of 1,233 pages or pieces, including enumerations for Alabama, the District of Columbia, Georgia, Illinois, Minnesota, New Jersey, New York, North Carolina, Ohio, South Dakota, and Texas. The records of only 6,160 of the 62,979,766 people enumerated survived the fire.
The original 1890 census enumerated people differently than ever before that time. Each family was enumerated on a separate sheet of paper. 1890 was the only year this was done.

The only surviving fragments are as follows:

Alabama—Perry County
District of Columbia—Q, S, 13th, 14th, RQ, Corcoran, 15th, SE, and Roggs streets, and Johnson Avenue
Georgia—Muscogee County (Columbus)
Illinois—McDonough County: Mound Township
Minnesota—Wright County: Rockford
New Jersey—Hudson County: Jersey City
New York—Westchester County: Eastchester; Suffok County: Brookhaven Township
North Carolina—Gaston County: South Point Township, Ricer Bend Township; Cleveland County: Township No. 2
Ohio—Hamilton County (Cincinnati); Clinton County: Wayne Township
South Dakota—Union County: Jefferson Township
Texas—Ellis County: S.P. no. 6, Mountain Peak, Ovila Precinct; Hood County: Precinct no. 5; Rusk County: Precinct no. 6 and J.P. no. 7; Trinity County: Trinity Town and Precinct no. 2; Kaufman County: Kaufman.

Fields in this database include: given name, surname, relationship, race, gender, age, birthplace, father’s birthplace, and mother’s birthplace. If you cannot find your family in this database, it may be useful to look at Ancestry.com’s 1890 Census Substitute.

[This information comes from Loretto Dennis Szucs and Sandra Hargreaves Luebking, eds. “Research in Census Records.” The Source: A Guidebook of American Genealogy, rev. ed. Ancestry, Inc.: Salt Lake City, 1997.]

Thursday, July 16, 2020

Syncing Between 2 computers--anywhere

Syncthing

This article is “off topic.” That is, it has nothing to do with the normal topics of this newsletter: genealogy, family history, DNA, and related articles. However, I believe it will interest many people, genealogists included, who use more than one computer.

Do you use two or more computers? Perhaps you have a desktop system and a laptop computer. Perhaps you use one computer at the office and a different one at home. Then again, perhaps you have two homes; a summer cottage or perhaps one home in the sunbelt and another “up north.” Do you keep separate computers in each location?
Perhaps you and a relative who is also working on the family tree want to keep genealogy information and old family photographs updated all the time in both of your computers in your homes. Whatever your situation, the question this article hopes to answer is, “How do you automatically keep some of the information up-to-date on both (or all) of the computers?”
The question can be answered with one word: Syncthing.

Here is a quote from the Syncthing.net website:
“Syncthing is a continuous file synchronization program. It synchronizes files between two or more computers in real time, safely protected from prying eyes. Your data is your data alone and you deserve to choose where it is stored, whether it is shared with some third party, and how it’s transmitted over the internet.”
In short, the name of “Syncthing” is appropriate. It is a FREE and open source piece of software that is designed to keep some (or all) of the information in 2 or more computers automatically synchronized all the time with minimal human action required. It works amongst side-by-side computers at home or computers separated across the country or even across the world.
Syncthing apparently can copy everything although I suspect the more common use is to duplicate only one or more folders (sub-directories) in two or more computers.
Syncthing is available free of charge for Macintosh OS X, Microsoft Windows, Linux, FreeBSD, Solaris, and OpenBSD. The program has been available for several years and has many thousands of satisfied users. In short, it is well tested.
“Free and open-source software (FOSS) is software that can be classified as both free software and open-source software. That is, anyone is freely licensed to use, copy, study, and change the software in any way, and the source code is openly shared so that people are encouraged to voluntarily improve the design of the software. This is in contrast to proprietary software, where the software is under restrictive copyright licensing and the source code is usually hidden from the users.”
Syncthing is Private & Secure
Again, quoting from the Syncthing web site:
Private. None of your data is ever stored anywhere else other than on your computers. There is no central server that might be compromised, legally or illegally.
Encrypted. All communication is secured using TLS. The encryption used includes perfect forward secrecy to prevent any eavesdropper from ever gaining access to your data.
Authenticated. Every node is identified by a strong cryptographic certificate. Only nodes you have explicitly allowed can connect to your cluster.
Also:
Easy to Use
Powerful. Synchronize as many folders as you need with different people or just between your own devices.
Portable. Configure and monitor Syncthing via a responsive and powerful interface accessible via your browser. Works on Mac OS X, Windows, Linux, FreeBSD, Solaris and OpenBSD. Run it on your desktop computers and synchronize them with your server for backup.
Simple. Syncthing doesn’t need IP addresses or advanced configuration: it just works, over LAN and over the Internet. Every machine is identified by an ID. Give your ID to your friends, share a folder and watch: UPnP will do if you don’t want to port forward or you don’t know how.
In short, Syncthing is easy to use and doesn’t share any of your data on some questionable company’s web site. In fact, it doesn’t even upload anything to a web site or corporate server; all data is sent directly between the computers you specify and to no place else. If you still have concerns, you can even examine the source code yourself and even compile your own version of Syncthing. Syncthing is available FREE of charge.
I have been using Syncthing to keep several folders on two computers up-to-date with each other for more than a year and have been pleased with its operation. Even though these two computers are 1,200 miles apart, Syncthing has proven to be very reliable.
The local power companies and internet companies have dropped power and/or internet connectivity at each location several times. Once the power and internet connectivity has been restored, each computer has powered up, rebooted (see the owners’ manuals for information on how to automatically re-boot your computers after a power outage), and continued running Syncthing in normal operation.
You can read more about Syncthing or even download the free program at: https://syncthing.net.